| |
|
|
 |
| GQ145 |
|
|
 |
| GQ105 |
|
|
 |
| GQ105B(全不锈钢) |
|
| |
 |
| GF105(液-液) |
|
|
 |
| GQ75 |
|
|
 |
| GQ75B(全不锈钢) |
|
|
|
各型号主要技术参数:..... Main Specifications: |
| 型号
Model |
分离筒内径
Cylinder
Bore Diameter |
分离筒容积
Cylinder
Cubage |
分离筒转速
Cylinder
Speed
|
最大离心力
R.C.F.
|
通水能力
Throughput
Capacity
|
电机功率
Motor
Power
|
电源
Operating Voltage
|
重量
Weight
|
外形尺寸
Dimension |
| GQ145 |
φ145(mm) |
11 (L) |
14000(r/min) |
15900(×g) |
1.5 (T/h) |
3 (kw) |
AC380(V) |
700(kg) |
890×580×1670(mm3) |
| GQ105 |
φ105(mm) |
6 (L) |
16000(r/min) |
15050(×g) |
1.2 (T/h) |
3 (kw) |
AC380(V) |
500(kg) |
700×450×1600(mm3) |
| GQ105B |
φ105(mm) |
6 (L) |
16000(r/min) |
15050(×g) |
1.2 (T/h) |
3 (kw) |
AC380(V) |
500(kg) |
700×450×1600(mm3) |
| GF105 |
φ105(mm) |
6 (L) |
16000(r/min) |
15050(×g) |
1.2 (T/h) |
3 (kw) |
AC380(V) |
500(kg) |
700×450×1600(mm3) |
| GQ75 |
φ75 (mm)
|
2 (L) |
20000(r/min) |
16700(×g) |
0.2 (T/h) |
1.2(kw) |
AC380(V) |
250(kg) |
660×390×1200(mm3)
|
| GQ75B |
φ75 (mm)
|
2 (L) |
20000(r/min) |
16700(×g) |
0.2 (T/h) |
1.2(kw) |
AC380(V) |
250(kg) |
660×390×1200(mm3)
|
|
各型号转鼓外观 |
|
| 工作原理： |
分离机由机身、传动装置、转鼓、集液盘、进液轴承座组成。转鼓上部是挠性主轴，下部是阻尼浮动轴承，主轴由联接座缓冲器与被动轮联接，电动机通过传送带、张紧轮将动力传递给被动轮、从而使转鼓绕自身轴线超速旋转。形成强大的离心力场。物料由底部进液口射入，离心力迫使料液沿转鼓内壁向上流动，且因料液不同组分的密度差而分层。
GF型，密度大的液相形成外环，密度轻的液相形成内环，流动到转鼓上部各自的排液口排出，微量固体沉积在转鼓壁上，待停机后人工卸出。GQ型，密度较大的固体微粒逐渐沉积在转鼓内壁形成沉渣层，待停机后人工卸出，澄清后的液相流动到转鼓上部的排液口排出。 |
|
|
| 主要用途： |
高速管式分离机主要用于生物医学、中药制剂、保健食品、饮料、化工等行业的液固或液液固三相分离。是目前用离心法进行分离的理想设备。最小分离颗粒为1微米，特别对一些液固相比重差异小，固体粒径细、含量低，介质腐蚀性强等物料的提取、浓缩、澄清较为适用。
特殊物料的分离可带料来本公司做选型分离试验，公司也可根据客户要求定制特殊材质的管式机。 |
| Working principle: |
 |
| This separator is consisted of man body, driving device,
bowl collecting pan and liquid-in bearing . the upper of the
bowl is principal axis and the lower of it is floating damper
. The principal axis is connected through and with a buffer
of by a motor through driving wheel and tension gear to make
the bowl rotate around its own ax is at a extra speed and
form a strong centrifuge force field. The stocd flows into
the liquid inlet from the bottom and is forced by centrifuge
force to flow upto and along theinner wall of the bowl and
then is separated the different layer according to density
difference of the different liquid components. The GFtype
Liquid phase with great density forms an outer loop and liquid
phase with light density forms an inner loop, and flows to
the upper of the bowl out of their respective liquid outlet
at the bowl is upper after clarification. |
| Main purposes:
|
| High speed tubular centrifuge is an ideal instrument
in biology, traditional medicine preparation, health food
, chemistry for liquid separating and solid liquid separating.
The minimum diameter of dissociative granule is 1 micron.
It is especially separated for low differentia proportion,
small granularity, low solid content, strong medium corrosion,
fuel distilled, concentration and clarify. If you want to
separate special material, please bring it to our company
to do the separating test. We can instrument requested by
customer. |
|
| 重要说明important explanation： |
1.管式离心机的实际生产能力视分离介质和分离效果而定。
The competence of the tubular is depend on medium separated
and effect separated.
2.如需在低温下分离介质，厂方可根据用户要求安装冷却管道，冷源自配。
If
you need low temperature separating, manufacturer can install
refrigeration tube requested by the customer,source of refrigeration
equipped by customer themselves. |
|
